Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Plumbing corrosion: diagnosis and prevention

Blue-green stains under faucets, a metallic taste or pinhole leaks in copper pipes often signal corrosive water. pH isn't the whole story: alkalinity, oxygen, water velocity and materials matter too. A precise diagnosis lets you correct the water and protect your plumbing.

Updated October 12, 2026

Signs and possible causes

SignPossible cause
Blue-green stainsCopper dissolved by acidic or low-alkalinity water
Pinhole leaksLocalized corrosion, often linked to water or velocity
Metallic taste in the morningWater that sat in the plumbing
Orange water from the hot tapWater heater corrosion or iron from the source

Useful tests

pH and alkalinity measured on site, then copper and lead at the tap following the lab's protocol. See collecting a water sample.

Other factors

Dissimilar metals joined together, high water velocity or very hot water also speed up corrosion.

Solutions

  • correct acidic water with a neutralizer;
  • replace damaged sections and fittings between dissimilar metals;
  • meanwhile, run cold water after it has been standing and drink cold water.

Frequently asked questions

Does a water softener cause corrosion?

Its presence alone doesn't prove it: water testing and a plumbing check tell you.

Does corrosion make water unsafe?

Dissolved copper and lead can exceed guidelines. They're measured at the tap.

Do I need to replace all my plumbing?

Not necessarily. Correcting the water slows corrosion; only damaged sections are replaced.

Sources and references
  1. Guideline Technical Document: pH · Health Canada
  2. Water Talk: Lead in drinking water · Health Canada
  3. Staining & Discoloration · Water Quality Association

Document your plumbing concern

Share test results, known materials and photographs of the signs observed.

Assess my situation