Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Sediment filters for well water

A sediment filter traps sand, rust and particles that cloud your water. Installed where water enters the house, it protects fixtures, the softener and the UV system. Choose the cartridge by particle size (microns), your home's flow and ease of maintenance, and replace it as soon as pressure starts to drop.

Updated October 12, 2026

What a sediment filter does

  • traps sand, silt and rust particles from a well;
  • clears slightly cloudy water;
  • protects aerators, valves and the treatment equipment after it.

It works on particles. Hardness, dissolved iron, odours and bacteria are handled by other equipment, chosen from your test results.

Choosing the right cartridge

SituationCommon choice
Visible sand or a new pumpSpin-down or washable screen, then a cartridge
Typical well water20 to 50 micron cartridge
Protecting UV or reverse osmosisFiner cartridge, often 5 micron
Heavy particle loadLarge housing or backwashing filter

Nominal vs absolute microns

A nominal rating catches most particles of that size; an absolute rating catches nearly all of them. Compare ratings using the manufacturer's test method. Finer cartridges clog faster and cut pressure sooner.

Why housing size matters

A larger housing has more surface area: the cartridge lasts longer and pressure stays steady when several taps run at once.

Replacing the cartridge

Change the cartridge when pressure drops or on the manufacturer's schedule, often every 3 to 6 months on a well. Pressure gauges before and after the filter make the call easy.

Changing a cartridge cleanly

Shut off the water, release pressure, clean the housing and O-ring, then fit a new cartridge. See replacing water filter cartridges.

The cartridge clogs very quickly

A cartridge that loads up in a few weeks points to the source: the well, the pump or iron settling out. Pre-treatment or a backwashing filter may fit better. See pressure loss after a filter.

Frequently asked questions

Does a sediment filter make well water safe to drink?

It improves clarity and protects equipment. Microbiological safety on a well comes from disinfection, such as UV, and regular testing.

What micron rating for well water?

A 20 to 50 micron cartridge often works as the first stage, followed by a finer one if the next equipment requires it.

Can I wash and reuse a cartridge?

Only if the manufacturer says so. Most cartridges are replaced.

Will it catch iron?

It catches iron that is already in particle form. Dissolved iron needs an iron filter.

Sources and references
  1. Cloudiness & Discoloration · Water Quality Association
  2. Treat your well water · Health Canada
  3. Standards for Water Treatment Systems · NSF

Restore useful water flow

Describe the particles, cartridge model and observed pressure loss.

Assess my filter