Hardness
Hardness mainly describes dissolved calcium and magnesium. It helps determine softener sizing and settings.
Keep the complete report, including units, the date and sampling location. These guides help prepare your conversation.
Hardness mainly describes dissolved calcium and magnesium. It helps determine softener sizing and settings.
An iron result should be reviewed with the rest of the water profile and installation conditions. An orange stain is an observation, not a measurement.
Manganese is a separate parameter from iron. A laboratory concentration should be interpreted before selecting the treatment configuration.
pH describes whether water is acidic or alkaline. It is part of the water profile reviewed before treatment selection.
TDS gives an overall indication of dissolved substances. The measurement alone does not identify specific contaminants or establish drinking-water safety.
Testing at the source and drinking tap helps distinguish sodium in the well from any contribution by a softener.
A sulphur smell helps guide the investigation. Water-source issues should be distinguished from plumbing and hot-water issues.
The utility disinfectant affects carbon-filter selection. Contact time and flow are part of system sizing.
Cloudiness and particles need to be characterized. Prefiltration may also protect downstream equipment.
Tannins and other organic matter may colour water. Distinguish dissolved colour from iron and particles before selecting a process.
Microbiological results require appropriate sampling and laboratory analysis. They cannot be inferred from taste or colour.
Lead assessment depends in part on sampling and plumbing. Verify a reduction claim specific to the selected model.
Check the units and reporting basis. Two numbers are comparable only if they express the same measurement.
The full water analysis and operating conditions guide targeted treatment selection. Performance then needs to be checked.
The performance sheet identifies the tested compounds and test conditions. A technology name does not replace this verification.
Uranium requires a specific chemical test. Clear water and satisfactory bacterial results do not rule it out.
Fluoride: RQEP standard of 1.5 mg/L. The topic guides distinguish other health-based standards from aesthetic objectives and hardness classes. LégisQuébec — RQEP, annexe 1 (French)
RQEP standards apply to distribution systems; they also help put a private-well result in context.
Values checked October 1, 2026