Updated October 12, 2026
Positive result: what to do now
- Drink bottled water, or boil water for at least one minute for drinking, cooking, baby formula and brushing teeth.
- Follow the lab's and your public health unit's instructions.
- Keep the report: date, sampling point and comments.
Reading your result
| Result | What it means | Next step |
|---|---|---|
| No E. coli, no coliforms | Indicators not detected when sampled | Test again in spring and fall |
| Coliforms present, no E. coli | Something is getting into the well | Find the cause, fix it, retest |
| E. coli present | Fecal contamination | Boil water, disinfect, fix the cause |
Finding the cause
Check the well cap and seal, drainage around the well, distance to the septic system, and any recent work, flooding or heavy rain.
Disinfecting the well
Shock chlorination disinfects the well and plumbing. It doesn't fix how contamination gets in: the cause must be corrected, then the water retested. See well shock chlorination.
Continuous protection
A UV system certified to NSF/ANSI 55 disinfects water as it flows, without chemicals. It needs clear water upstream: a sediment filter and, if needed, iron or tannin treatment. Yearly lamp service and regular testing complete the protection.
Frequently asked questions
Does a water softener reduce E. coli?
No. A softener is not a disinfection device.
Does UV also handle chemical contaminants?
No. Nitrate or metals are checked separately, based on your test results.
Where can I test my well water?
In Ontario, Public Health Ontario tests well water for bacteria at no charge. In Quebec, use an accredited lab. EUREk can also arrange laboratory microbiological testing.
Next steps
Sources and references
- Guideline Technical Document: Escherichia coli · Health Canada
- Well water testing · Public Health Ontario
- Testing and treating private water wells · Government of Ontario
- Analysis of drinking water from a well · Government of Quebec
- Protect and maintain your well · Health Canada