Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

UV or chlorine: which disinfection for your well?

For continuous disinfection of well water, UV is the most common choice at home: no chemicals, no taste, and simple yearly service. Continuous chlorination leaves a disinfectant in the plumbing and also oxidizes iron and sulfur, but it needs dosing, contact time and regular monitoring.

Updated October 12, 2026

Comparing the two

CriterionUV systemContinuous chlorination
Taste and odourNo changePossible chlorine taste
Residual disinfectantNoYes, in the plumbing
Giardia and CryptosporidiumEffectiveCryptosporidium resists chlorine
Iron and sulfurMust be treated firstOxidized by chlorine, then filtered
MaintenanceYearly lamp, clean sleeveChemical, metering pump, residual checks

When chlorination makes sense

Water heavy in iron, sulfur or iron bacteria can justify chlorination followed by filtration. See continuous chlorination.

Shock chlorination: a one-time fix

Shock chlorination disinfects the well after work or a positive test. It doesn't replace continuous disinfection. See well shock chlorination.

Frequently asked questions

Does UV replace all filters?

No. It targets microorganisms, not hardness or chemical contaminants. Pre-treatment is often needed.

Can I copy a chlorine dose I found online?

No. Dosing depends on the water and the system, so it has to be set and checked.

What certification should a UV system have?

NSF/ANSI 55, with the model chosen for your water and flow.

Sources and references
  1. Water treatment · Health Canada
  2. Enteric protozoa: Giardia and Cryptosporidium · Health Canada
  3. Ultraviolet Technical Fact Sheet · Water Quality Association
  4. Treat your well water · Health Canada

Plan disinfection and monitoring

Share your source, flow and microbiological results.

Request a water assessment