Scale and white deposits
Scale keeps returning on taps, shower glass and dishes.
Understand and actScale keeps returning on taps, shower glass and dishes.
Understand and actStains appear in toilets, sinks or laundry.
Understand and actA sulphur smell appears when you turn on a tap.
Understand and actYour water comes from the municipal supply, but you dislike the taste.
Understand and actYou see particles, sand or water that is not clear.
Understand and actYou want to understand your well water or a recent test report.
Understand and actEUREk · Understanding your water
Visible signs help guide an investigation, but cannot identify a contaminant or establish drinking water safety on their own. Start by noting where, when and how the issue appears.
Does it affect every tap or just one? Cold and hot water? Did it begin after an absence, heavy rainfall or service work? An odour limited to hot water may call for a water heater assessment. Reduced pressure after a filter also calls for checking the device and its flow conditions.
White deposits may point toward a hardness measurement. Orange stains suggest checking iron, while dark marks may justify manganese testing. Yellow colour can have several dissolved or suspended causes. These are clues, not results.
Avoid selecting a cartridge solely from the colour of a stain. Two water supplies that look similar may require different processes and maintenance.
References: Recommandations pour la qualité de l'eau potable au Canada — Tableaux sommaires (in French)
Microorganisms and several chemical contaminants may leave appearance, odour and taste unchanged. Regular microbiological testing remains relevant for private wells even when the water seems normal. Follow the responsible authority’s instructions during an official advisory.
References: La qualité de l'eau de mon puits (in French)
Send EUREk your test reports, photographs of deposits and the references of existing devices. This helps distinguish source, plumbing and treatment-operation issues and identify useful next checks. Treatment can then be selected around measured parameters and intended uses.
No. Taste does not establish drinking water safety. Do not taste suspect water to try to identify the problem.
A visible improvement alone does not confirm the treatment objective has been met. Targeted parameters should be checked using appropriate methods.
Open a topic to find its guides.
Specific observations help us prepare the right checks.
Request a water assessment