Coliform or E. coli in your well water: what to do first
- Stop drinking untreated water if E. coli is present. Use bottled or boiled water for drinking, cooking and brushing teeth, and follow your public health unit's advice.
- Find the entry point. Check the well cap, casing, seal and surface drainage (Health Canada's well maintenance tips). Recent flooding, snowmelt or well work are common triggers.
- Shock chlorinate the well.
- Retest after flushing, then again a few weeks later.
Total coliforms are an indicator of a possible pathway into the well; E. coli indicates fecal contamination. More detail: coliform bacteria in well water and E. coli in well water.
How shock chlorination works
The steps, in plain terms
Put all treatment equipment on bypass and remove filter cartridges. Add chlorine to the well in the amount your provincial procedure specifies for the well's water volume. Run each tap until you smell chlorine, let it sit for the contact time, then flush until the smell is gone. The Water Quality Association (WQA) recommends sanitizing treatment equipment per the manufacturer and replacing affected filters, then resampling.
Why it doesn't always last
Shock chlorination treats contamination that is present now. If surface water keeps getting in through a damaged cap or casing, bacteria come back. Repairs and follow-up testing are what make the result stick.
Safety notes
Concentrated chlorine damages pitless adapters and wiring if mishandled, and must never be mixed with acids or vinegar. If you are unsure about your well's volume or condition, have a professional do it.
Choosing a well water filtration system
A complete well water treatment system is built in a set order, based on your test results:
| Step | Purpose | Typical equipment |
|---|---|---|
| 1 | Sand and sediment | Sediment filter |
| 2 | Iron, manganese, sulfur smell | Iron and manganese filter |
| 3 | Hardness and scale | Water softener |
| 4 | Bacteria and viruses | UV disinfection |
| 5 | Drinking water at the kitchen tap | Reverse osmosis |
Why UV goes last
Iron, manganese, hardness, tannins and turbidity foul the quartz sleeve and shield microorganisms from the light. The WQA lists common pre-treatment targets for UV: hardness under 7 gpg, iron under 0.3 mg/L, manganese under 0.05 mg/L, tannins under 1 mg/L and turbidity under 1 NTU. The manufacturer's limits always apply.
Choosing a UV system for a well
We recommend UV systems certified to NSF/ANSI 55, sized to your home's peak flow and matched to your pre-treatment. As a certified VIQUA partner and installer, we select the model from your test results and handle the yearly lamp change. See UV light for well water.
What about a whole-house well water filter alone?
A sediment, carbon or iron filter improves clarity, taste and staining. When bacteria are a concern, the system adds a disinfection step such as UV.
Testing your well: Ontario vs Quebec
In Ontario, private well owners can get free bacteriological testing (total coliforms and E. coli) through Public Health Ontario. In Quebec, testing is done by accredited laboratories, and twice-yearly bacteria testing (spring and fall) is recommended. We add the chemistry that drives treatment: hardness, iron, manganese, pH and more. See water testing.
Frequently asked questions
How often should I test my well water?
At least once a year for bacteria and nitrate; twice a year (spring and fall) is recommended in Quebec. Test again after flooding, well work, or any change in taste, smell or colour.
Can I drink well water with coliform but no E. coli?
Follow your public health unit's advice. Coliforms alone signal that something may be getting into the well; the cause should be found and fixed, and the water retested.
Does a water softener kill bacteria?
No. A softener treats hardness; it is not a disinfection device.
How much does a well water treatment system cost?
It depends entirely on your test results: a well that only needs UV costs far less than one that also needs iron filtration and softening. We quote after testing, and financing is available.
Sources and references
- Protect and maintain your well · Health Canada
- Test your well water · Health Canada
- Well water testing · Public Health Ontario
- Analysis of drinking water from a well · Government of Quebec
- Bacteria & Virus · Water Quality Association