UV is often called a "UV water filter" or "UV sterilizer," but it doesn't filter anything. It disinfects water as it flows past the lamp.
How a UV water system works
Water flows through a stainless chamber around a lamp protected by a quartz sleeve. UV-C light damages the DNA of microorganisms so they can't reproduce. Treatment is instant and doesn't change taste or smell.
UV as part of a complete system
UV takes care of microorganisms. Depending on your test, it is paired with an iron and manganese filter, a water softener or reverse osmosis for other parameters. At installation, the home's plumbing is disinfected so the system starts clean.
A certified system, chosen for your water
We install UV systems certified to NSF/ANSI 55, the reference standard for ultraviolet microbiological water treatment. The model is chosen on three criteria:
| Criteria | What we check |
|---|---|
| Water quality | Clarity, hardness, iron, manganese and tannins from your test |
| Peak flow | Bathrooms and simultaneous use |
| Maintenance | Access to the lamp and sleeve, parts availability |
As a certified VIQUA partner and installer, EUREk selects the model from your test and flow, then handles the yearly lamp change.
Pre-treatment: why clear water matters
Particles, colour, iron and hardness block UV light or coat the quartz sleeve. Common targets cited by the Water Quality Association (the manufacturer's limits always apply):
- Hardness under 7 gpg (120 mg/L)
- Iron under 0.3 mg/L and manganese under 0.05 mg/L
- Tannins under 1 mg/L
- Turbidity under 1 NTU
That's why UV is installed last, after a sediment filter, an iron and manganese filter and a water softener when needed.
Sizing a UV system for your home
Every UV unit is rated for a maximum flow. If several taps run at once and exceed it, water moves too fast to receive the full dose. We size to your home's peak flow and add a flow restrictor when needed.
VIQUA UV lamp replacement and maintenance
Replace the lamp every year
A lamp that still glows can still have lost UV output. Replace it on the manufacturer's schedule, typically once a year, and note the date.
Clean or replace the quartz sleeve
Mineral film on the sleeve cuts UV transmission. Clean it at every lamp change and replace it if it's scratched or cloudy.
When the alarm sounds
The alarm usually means the lamp has reached end of life or there is a fault. Replace the lamp on schedule and, if there is a fault, treat the water as untreated until it's fixed.
After a power outage
Water that flows during an outage is not treated. When power returns, let the lamp warm up and flush the lines per the manufacturer's instructions before drinking.
We stock replacement UV lamps, sleeves and parts and offer maintenance plans.
Frequently asked questions
Will a UV light make my well water drinkable?
A correctly sized NSF/ANSI 55 certified system, on pre-treated water and properly maintained, inactivates the microorganisms it is certified for. Lab testing of chemical parameters completes the picture and confirms your water meets drinking water guidelines.
How long does a UV lamp last?
Most lamps are rated for about one year of continuous use. Replace them on schedule even if they still light up.
How much electricity does a UV system use?
About as much as a household light bulb, but it must stay on 24/7.
Do I need a softener before a UV system?
If hardness is above about 7 gpg or iron above 0.3 mg/L, pre-treatment protects the sleeve and keeps the dose on target.
Is UV enough for a dug well?
It can be part of the solution, but dug and shallow wells are more vulnerable. Well protection, pre-filtration and regular testing remain essential.
Where we work
Our team installs and services UV systems at home, in English or French: Gatineau (Aylmer, Hull, Buckingham, Masson-Angers), Chelsea, Wakefield and Luskville, Cantley, Val-des-Monts, Papineau, the Vallée-de-la-Gatineau, the Pontiac, Ottawa and Prescott-Russell.
Sources and references
- Bacteria & Virus · Water Quality Association
- Treat your well water · Health Canada
- Testing and treating private water wells · Government of Ontario