Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Manganese in well water: testing and treatment

Manganese comes naturally from soil and bedrock. In well water it leaves black or brown stains and deposits in appliances. Health Canada sets two benchmarks: 0.12 mg/L for health and 0.02 mg/L for staining. Only a lab test gives the level; treatment is then chosen together with iron and pH.

Updated October 12, 2026

25MnManganese

Signs of manganese

  • black or dark brown stains on fixtures and laundry;
  • small black specks at the tap or in aerators;
  • a bitter or metallic taste;
  • black deposits in the water heater and filters.

Clear water can still contain manganese, so appearance never replaces a test.

Benchmarks to know

BenchmarkValuePurpose
Health Canada maximum acceptable concentration0.12 mg/LHealth
Health Canada aesthetic objective0.02 mg/LStaining and taste
Quebec drinking water regulation0.12 mg/LHealth

Why infants need extra attention

Health Canada considers infants more sensitive to manganese. For baby formula, use water with a known level below the health benchmark.

Treating manganese

Dissolved manganese must first be oxidized so a filter can hold it. The right process depends on the level, pH and iron.

Oxidation and filtration

An iron and manganese filter oxidizes manganese, traps it in a media bed and cleans itself by backwashing. Manganese often needs a higher pH than iron to oxidize well.

Water softener or reverse osmosis

A softener can reduce low levels of dissolved manganese, depending on the model and the water. Reverse osmosis at the kitchen tap adds protection for drinking water.

Confirm the result

Test the treated water after installation, then whenever something changes: stains return, well work or media service.

Frequently asked questions

Can clear water contain manganese?

Yes. You can't judge the level by sight or taste. A lab test is needed.

Is manganese in water dangerous?

Above 0.12 mg/L, Health Canada recommends action for drinking water. Between 0.02 and 0.12 mg/L, the issue is mainly staining and taste.

Why do black stains come back after the filter?

The media may be exhausted, set incorrectly or overwhelmed by a change in the water. See iron or manganese stains returning.

Sources and references
  1. Guideline Technical Document: Manganese · Health Canada
  2. Regulation respecting the quality of drinking water · Government of Quebec
  3. Manganese FAQ · Water Quality Association
  4. Test your well water · Health Canada

Review your manganese results

Share your available tests and explain how the water is used, including food preparation. EUREk can help define treatment and follow-up requirements.

Evaluate my situation