Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Backwashing filters: media, flow and maintenance

A backwashing filter holds a bed of media in a tank. It traps particles, oxidized iron or sulfur, then cleans itself: at set intervals, water flows in reverse and flushes deposits to drain. It's a smart alternative to cartridges when the load is heavy, as long as the well supplies enough backwash flow.

Updated October 12, 2026

Common media

MediaUse
Multimedia or zeoliteSediment and turbidity
Oxidizing mediaIron, manganese and sulfur
Activated carbonTaste, chlorine and odours
CalciteCorrecting acidic water

Backwash flow

Backwashing needs enough flow to lift the media bed. The well and pump must supply it. See backwash flow and drainage.

Drainage

Backwash water goes to drain, in line with regulations and the septic system. It's planned from the start.

Frequently asked questions

How often does the filter backwash?

Based on water used or a set schedule, often overnight.

Does the media need replacing?

Yes, after several years, depending on the water and media.

Does a backwashing filter reduce pressure?

Very little, if it's properly sized and backwashed regularly.

Sources and references
  1. Cloudiness & Discoloration · Water Quality Association
  2. Staining & Discoloration · Water Quality Association
  3. Treat your well water · Health Canada

Check backwashing conditions

Gather your pump, filter and drain details for an assessment.

Plan a system check