Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

MTBE and fuel contamination in well water

A gasoline or heating oil smell in well water signals fuel contamination, often from a leaking tank or a spill. MTBE, a gasoline additive, can be tasted at very low levels. Stop drinking the water, have it tested and find the source before choosing treatment.

Updated October 12, 2026

Benchmarks

ParameterBenchmark
MTBE, Health Canada aesthetic objective0.015 mg/L
Benzene, MAC0.005 mg/L
Common sourcesOil tank, gas station, spill

The first step is finding and stopping the leak. Treatment doesn't replace site cleanup.

Treatment

Enough activated carbon, sometimes combined with aeration, reduces many fuel compounds. MTBE needs specific sizing. See carbon filters.

Next steps

Notify your provincial environment ministry and your insurer, and keep your test results.

Frequently asked questions

Can I shower with this water?

Fuel compounds evaporate in the shower. Limit use until you have results.

Will the smell go away on its own?

Rarely, as long as the source isn't controlled.

Is reverse osmosis enough?

It only treats one tap. Fuel usually calls for point-of-entry treatment.

Sources and references
  1. Guidelines for Canadian Drinking Water Quality: Summary Tables · Health Canada
  2. Well water testing · Health Canada

Prepare a targeted investigation

EUREk can review your results and installation for treatment needs once permitted water uses and the compounds requiring investigation are clear.

Review my well water