Key terms
| Term | Definition |
|---|---|
| Hardness | Dissolved calcium and magnesium, in mg/L or grains per gallon |
| MAC | Maximum acceptable concentration, set for health |
| AO | Aesthetic objective: taste, odour, colour |
| TDS | Total dissolved solids |
| Regeneration | Recharging softener resin with brine |
| Backwash | Reversing flow to clean a filter |
| Point of entry | Treats the whole house |
| Point of use | Treats a single tap |
| UV transmittance | Share of UV light that passes through water |
Units of measure
In water, mg/L equals ppm. One grain per gallon equals 17.1 mg/L. See understanding test results.
NSF/ANSI standards
42 and 53 for filters, 44 for softeners, 55 for UV, 58 for reverse osmosis. See certifications.
Pressure loss and service flow
Pressure loss is the pressure drop a unit causes. Service flow is the rate at which it treats water effectively.
Frequently asked questions
What's the difference between MAC and AO?
A MAC is about health. An AO is about taste, odour or appearance.
Are ppm and mg/L the same?
For water, yes in practice.
What is filter media?
The material that does the work in a filter: sand, carbon or resin. See media selection.
Sources and references
- Guidelines for Canadian Drinking Water Quality: Summary Tables · Health Canada
- Standards for Water Treatment Systems · NSF
- Scale Deposits · Water Quality Association