Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Maintaining aeration and multiple-tank treatment systems

An aeration system adds air to the water to release sulfur and gases and to make iron settle out. It usually combines a compressor or pump, a tank and a filter. A returning odour, unusual pump cycling or cloudy water are signs it needs service.

Updated October 12, 2026

What we check on every visit

ComponentCheck
Air compressor or injectorOperation, air filter, timer
Vent and relief valveGases venting outdoors
Retention tankIron or sulfur deposits, draining
Pump and float switchesCycling, pressure, check valves
Downstream filterBackwash and media condition

Why the vent matters

Released gases such as hydrogen sulfide or methane must exit outdoors. A blocked vent sends the odour back into the water and the room.

Tanks work as one system

In a multi-tank setup, each stage prepares the next. A fault upstream makes the final filter work harder.

Frequently asked questions

The sulfur smell is back: what should be checked?

The compressor, the vent and the filter backwash. More sulfur in the well can also call for a settings change.

Does the tank need draining?

Yes, periodically, when deposits build up at the bottom. How often depends on the iron and sulfur in your water.

Does aeration treat bacteria?

No. On a well, a UV system at the end of treatment handles that.

Sources and references
  1. Guidelines for Canadian Drinking Water Quality: Operational Parameters · Health Canada
  2. Drinking water and health: Treatment · Health Canada
  3. Bad Taste & Smell · Water Quality Association

Describe your multi-stage installation

Send an overview photo, equipment references and the operating changes you have noticed.

Plan suitable maintenance