Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Maintaining chlorination systems and injection pumps

Continuous chlorination only works if the right dose reaches the water and stays in contact long enough. Maintenance checks the chlorine solution, the injection pump, the check valve and, above all, the free chlorine measured after the contact tank.

Updated October 12, 2026

Maintenance points

ComponentWhat to do
Chlorine solutionMix fresh: it weakens over time
Injection pumpCheck output, diaphragm, tubing
Injection check valve and foot valveDescale, replace as needed
Contact tankConfirm the design contact time
Free chlorine at the outletTest with a reliable kit
Downstream carbon filterReplace per the manufacturer

Why test instead of trusting the pump

A running pump proves nothing if the solution is weak or the valve is plugged. Only a free chlorine reading confirms treatment.

Handling chlorine safely

Gloves and eye protection, a ventilated room, and never mix with acid or vinegar: the mixture releases a toxic gas.

Frequently asked questions

How often should the solution be mixed?

It depends on use and temperature. Stored solution loses strength, so mix small batches.

The water tastes too much of chlorine: what now?

Have the dose checked, along with the downstream carbon filter that reduces chlorine taste.

How much contact time is needed?

It depends on dose, pH and temperature. See chlorine contact time.

Sources and references
  1. Treat your well water · Health Canada
  2. Guidelines for Canadian Drinking Water Quality: Summary Tables · Health Canada
  3. Bacteria & Virus · Water Quality Association

Prepare chlorination maintenance

Send pump references, the product in use and recent available control results.

Request chlorination service