Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

On-site water tests: pH, hardness, conductivity and limits

On-site measurements give pH, hardness, iron or conductivity within minutes. They guide the choice of treatment and confirm that it is working. For a health-related contaminant such as arsenic, lead or bacteria, an accredited lab confirms the result.

Updated October 12, 2026

What each reading reveals

ReadingWhat it shows
pHAcidic or basic water; corrosion risk
HardnessCalcium and magnesium that cause scale
IronOrange stains and metallic taste
Conductivity or TDSTotal dissolved salts

pH is measured quickly

A sample left standing loses dissolved gases and its pH shifts. It is measured on site with a calibrated meter.

What TDS tells you

A TDS meter reads total dissolved salts without singling out lead, nitrate or bacteria. On an RO system it mainly tracks membrane performance.

Method matters

Titration is more precise than a test strip, which reads in ranges. Expired reagents skew the reading.

Frequently asked questions

Do on-site tests replace the lab?

For choosing a softener or iron filter they are often enough. For health concerns, the lab confirms.

Is low pH a problem?

It promotes corrosion of copper and lead in plumbing. See pH and acidic water.

Can I test myself?

Yes, with strips or a TDS meter, keeping their limits in mind.

Sources and references
  1. Operational parameters · Health Canada
  2. Drinking water treatment · Health Canada
  3. Testing your well water · Health Canada

Prepare an on-site assessment

Describe what you have noticed and share previous reports so the assessment addresses the right questions.

Request a water assessment