Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Water hardness testing: understand your result

Hardness measures the dissolved calcium and magnesium that cause scale. Labs report it in mg/L as calcium carbonate (CaCO3); softeners are often set in grains per gallon (gpg). To convert: 1 gpg is about 17.1 mg/L.

Updated October 12, 2026

Reading your result

mg/L as CaCO3gpgWater
Under 60Under 3.5Soft
60 to 1203.5 to 7Moderately hard
120 to 1807 to 10.5Hard
Over 180Over 10.5Very hard

Use the right method

Titration gives a precise value; a test strip reads in ranges. Sizing a softener calls for a precise measurement.

Before and after the softener

Test at the inlet and at a softened tap. Water turning hard again can point to low salt, an open bypass or a setting to adjust. See water softener maintenance.

Iron counts too

Iron and manganese are added to hardness when sizing a softener. See sizing a water softener.

Frequently asked questions

Is hard water a health concern?

No. It mainly causes scale, spots and higher soap use.

At what hardness is a softener worth it?

Above roughly 120 mg/L (7 gpg), scale becomes clearly visible; your appliances and habits guide the choice.

Soap doesn't lather well: is it hardness?

Often, but only a test confirms it.

Sources and references
  1. Scale deposits · WQA
  2. Operational parameters · Health Canada
  3. Standards for water treatment systems · NSF

Turn the hardness reading into a useful plan

Share the result and unit, the number of occupants and the water uses that may run at the same time.

Assess my softening needs