Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Booster pumps and pressure regulators for water treatment

A booster pump raises pressure when your supply falls short. A pressure regulator lowers it when it's too high, often on city water. Both protect your water treatment: low pressure hurts filter backwash and RO output, high pressure wears out valves and tanks.

Updated October 12, 2026

Which one do you need?

SituationSolution
Low supply pressureBooster pump
RO system producing slowlyRO booster pump
High city pressurePressure reducing valve
Water hammerRegulator and hammer arrestor

A gauge reading at an outdoor tap, with nothing else running, is the quick first check.

Where do they go?

The regulator goes at the entry, before treatment. A booster goes where it's needed, often ahead of the equipment it feeds. See pressure and pressure loss.

Plumbing code limits

The code caps pressure inside the home. Above roughly 80 psi, a pressure reducing valve is generally required.

Frequently asked questions

Will a booster pump fix a low-yield well?

No. It raises pressure, not the amount of water the well supplies.

How much pressure does an RO system need?

Often at least 40 psi for good output. A booster pump helps below that.

Does a pressure regulator reduce flow?

Very little if it's sized correctly. It mostly steadies pressure.

Sources and references
  1. Water treatment devices for drinking water · Health Canada
  2. Standards for Water Treatment Systems · NSF

Have your pressure assessed

Describe the affected equipment and share available readings without changing its settings.

Assess my water pressure