Skip to Content
Skip to content
EUREk · Your local water expert in OutaouaisAuthorized, Independent Kinetico Dealer819 303-0838

EUREk · Understanding your water

Reverse osmosis: low flow or a tank that won't fill

Reverse osmosis produces slowly, so a trickle right after heavy use is normal while the tank refills. If flow stays weak, the usual causes are clogged pre-filters, wrong tank air pressure, low inlet pressure or a fouled membrane.

Updated October 12, 2026

Causes, in the order we check them

CauseClue
Tank recently emptiedFlow returns after a few hours
Clogged pre-filtersLast change over a year ago
Tank air pressureTank feels heavy but little water comes out
Low inlet pressureLow-pressure well, very cold water
Fouled membraneLow production and rising TDS
Tank valve closedRight after service

Cold water produces less

Membrane output drops with water temperature. In winter, on a well, the difference is noticeable.

Setting the tank pressure

Air pressure is checked with the tank empty, using a gauge, at the value the manufacturer specifies.

Frequently asked questions

How long does the tank take to fill?

Often a few hours, depending on the model, pressure and temperature. The manual lists the expected production.

Will a booster pump help?

Yes, when inlet pressure is too low. See booster pumps and pressure regulators.

Does the membrane need replacing?

Only if pre-filters, pressure and tank check out and the TDS confirms a drop.

Sources and references
  1. Drinking water and health: Treatment · Health Canada
  2. Standards for Water Treatment Systems · NSF
  3. Treat your well water · Health Canada

Prepare a flow diagnosis

Describe withdrawals, waiting time and any equipment indicators.

Have my RO checked